CORE DRILL DI BANDUNG 081 394 133 446

 

      

                    Core Drilling Test Set

(item code : RL-400A)

Dimension (l x w x h)	: 97 x 57 x 150 cm
Gross Weight	: 145 kg

For cutting core samples from asphalt, concrete and other material on the road, run ways and structures.,
RI-401	Core Drilling Machine	Cast alumunium frame, gasoline engine 7 HP, 4 cycle vertical drilling position: rubber caster, up to 4″ dia. bit	1 Set
RI-406	Diamond Bit	4″ inner dia.	1 Pc
RI-407	Sample Tong	4″ dia.	1 Pc
RI-408	Breaking Strip	Galvanized steel	1 Pc
RI-409	Spanner	Steel 42 mm and 32 mm	2 Pcs

Read More

SONDIR 2.5 TON MANUAL,DIGITAL,HYDRAULIC. BANDUNG 081 394 133 446

                   Dutch Cone Penetrometer

(item code : RS-200)

Dimension (l x w x h):	220 x 120 x 80 cm
Gross Weight:	460 kg

ASTM D-3441 For determining cone resistance and friction resistance of soil layers.
RS-201	Press-in Apparatus	Steel construction, manually operated 2,5 tons capacity	1 Set
RS-202A	Sounding Rod	Machined steel, 36 mm o.d., 1 mtr effective length, tappered thread	20 Pcs
RS-203	Plunger Rod	Round bar, 15 mm dia, 1 mtr length	20 Pcs
RS-204	Adaptor
Consist of
RS-204.1	Push Adaptor	Machined steel	1 Pc
RS-204.2	Pull Adaptor	Machined steel	1 Pc
RS-205	Spiral Anchor
Consist of
RS-205.1	Spiral Anchor	Machined steel, elded 1.5 mtr length	4 Pcs
RS-205.2	Handle and T-piece	Machined steel, welded	1 Set
RS-206A	Mantel cone	Precision machined steel, hardened, tappered thread, 60o angle, 35.7 mm dia.	1 Pc
RS-207A	Friction cone	Precision machined steel, hardened, with friction jacket, tappered thread, 60o angle, 35.7 mm dia.
RS-208	Wrenches Set	Pile wrench (2), adjustable wrench (1), spanner wrench (1), allen key (1), screw driver (1), oil can (1), steel brush (1), piston wrench (1), seals tape (2), oil seals (2), steel box (1)	1 Set
RS-209	Fasten Press	Beam Cannal
Consist of
RS-209.1	Long Fasten Press	1.5 mtr length, 8 cm width	2 Pcs
RS-209.2	Short Fasten Press	1 mtr length, 12 cm width	2 Pcs
RG-671	Manometer	60 kg/cm2 capacity	1 Pc
RG-673	Manometer	250 kg/cm2 capacity	1 Pc

Also required,
but not part of this set:

RG-721 Levels

RG-748 Leather Gloves

RG-897 Roll Meter

RG-965 Hydraulic Oil

Read More

SONDIR 5 TON MANUAL,HYDRAULIC,DIGITAL BANDUNG 081 394 133 446

                 Dutch Cone Penetrometer

(item code : RS-210)

Dimension (l x w x h) : 220 x 120 x 80 cm Gross Weight : 500 kg

ASTM D-3441 For determining cone resistance and friction resistance of soil layers.
RS-211	Press-in Apparatus	Steel construction, manually operated 5 tons capacity.	1 Set
RS-202A	Sounding Rod	Machined steel, 36 mm o.d., 1 mtr effective length, tappered thread	20 Pcs
RS-203	Plunger Rod	Round bar, 15 mm dia, 1 mtr length.	20 Pcs
RS-204	Adaptor
Consist of
RS-204.1	Push Adaptor	Machined steel	1 Pc
RS-204.2	Pull Adaptor	Machined steel	1 Pc
RS-205	Spiral Anchor
Consist of
RS-205.1	Spiral Anchor	Machined steel, elded 1.5 mtr length	4 Pcs
RS-205.2	Handle and T-piece	Machined steel, welded	1 Set
RS-206A	Mantel cone	Precision machined steel, hardened, tappered thread, 60o angle, 35.7 mm dia.	1 Pc
RS-207A	Friction cone	Precision machined steel, hardened, with friction jacket, tappered thread, 60oangle, 35.7 mm dia.
RS-208	Wrenches Set	Pile wrench (2), adjustable wrench (1), spanner wrench (1), allen key (1), screw driver (1), oil can (1), steel brush (1), piston wrench (1), seals tape (2), oil seals (2), steel box (1)	1 Set
RS-219	Fasten Press	Beam Cannal
Consist of
RS-209.1	Long Fasten Press	1.8 mtr length, 12 cm width	2 Pcs
RS-209.2	Short Fasten Press	1.2 mtr length, 15 cm width	2 Pcs
RG-671	Manometer	60 kg/cm2 capacity	1 Pc
RG-675	Manometer	500 kg/cm2 capacity	1 Pc

Also required, but not part of this set:  RG-721 Levels RG-748 Leather Gloves RG-897 Roll Meter RG-965 Hydraulic Oil

Read More

KONTAK KAMI


PHONE        : 022-82001060

HANDPHONE  : 081 394 133 446

EMAIL              : labtekniksipil@engineer.com



ADDRESS    :

Jln. Cihanjuang NO 182
Kel Cibabat, Kec Cimahi Utara
Kota Cimahi 40513
Bandung Jawa Barat- Indonesia

Read More

COMPRESSION MACHINE / TES BETON MANUAL/ ELEKTRIK 1500 KN, 2000 KN, 3000 KN DI BANDUNG 081 394 133 446

                   Compression Machine

(item code : RC-321.4)

For determining compressive strength of concrete cube 15 x 15 x15 cm or concrete cylinder 15 cm dia. x 30 cn height
Frame	Heavy-duty welded steel construction 30 cm (profile steel columns 10 thick botttom and upper plate)
Hydraulic System For 1500 kN Cap.	Cast iron cylinder, Hard-chromed piston, 230 mm diameter Maximum working pressure 50.000 kPa Overall dimension 280 mm dia. x 320 mm height Single action, gravity return
Hydraulic System For 2000 kN Cap.	Mild-Steel cylinder, Hard-chromed piston, 230 mm diameter Maximum working pressure 50.000 kPa Overall dimension 300 mm dia. x 320 mm height Single action, gravity return
Hydraulic System For 3000 kN Cap.	Mild-Steel cylinder, Hard-chromed piston, 250 mm diameter Maximum working pressure 50.000 kPa Overall dimension 330 mm dia. x 320 mm height Single action, gravity return
Hydraulic Pump	Hand operated, single action 6.000 ml reservoir capacity Maximum working pressure 50.000 kPa Single action, gravity return
Force Gauge	Bourdon tube manometer, 280 mm dial diameter With maximum load pointer. Steel box housing. Calibrated by JNK
Compressive Platen	Upper : 180 x 180 mm, ball seating Lower : 250 mm diameter
Clearance	Horizontal: 290 mm Vertikal  : 310 mm
Dimension	660 x 600 x 1400 mm (l x w x h) approx.
Weight	500 kg

RC-321.3	Compression Machine	1500 kN capacity, 10 kN increments
RC-321.4	Compression Machine	2000 kN capacity, 10 kN increments
RC-321.5	Compression Machine	3000 kN capacity, 20 kN increments

Read More

COMPRESSION MACHINE 1500 KN, 2000, KN, 3000 KN MANUAL/ELEKTRIK/ DI BANDUNG 081 394 133 446

                   Compression Machine

(item code : RC-321.4)

For determining compressive strength of concrete cube 15 x 15 x15 cm or concrete cylinder 15 cm dia. x 30 cn height
Frame	Heavy-duty welded steel construction 30 cm (profile steel columns 10 thick botttom and upper plate)
Hydraulic System For 1500 kN Cap.	Cast iron cylinder, Hard-chromed piston, 230 mm diameter Maximum working pressure 50.000 kPa Overall dimension 280 mm dia. x 320 mm height Single action, gravity return
Hydraulic System For 2000 kN Cap.	Mild-Steel cylinder, Hard-chromed piston, 230 mm diameter Maximum working pressure 50.000 kPa Overall dimension 300 mm dia. x 320 mm height Single action, gravity return
Hydraulic System For 3000 kN Cap.	Mild-Steel cylinder, Hard-chromed piston, 250 mm diameter Maximum working pressure 50.000 kPa Overall dimension 330 mm dia. x 320 mm height Single action, gravity return
Hydraulic Pump	Hand operated, single action 6.000 ml reservoir capacity Maximum working pressure 50.000 kPa Single action, gravity return
Force Gauge	Bourdon tube manometer, 280 mm dial diameter With maximum load pointer. Steel box housing. Calibrated by JNK
Compressive Platen	Upper : 180 x 180 mm, ball seating Lower : 250 mm diameter
Clearance	Horizontal: 290 mm Vertikal  : 310 mm
Dimension	660 x 600 x 1400 mm (l x w x h) approx.
Weight	500 kg

RC-321.3	Compression Machine	1500 kN capacity, 10 kN increments
RC-321.4	Compression Machine	2000 kN capacity, 10 kN increments
RC-321.5	Compression Machine	3000 kN capacity, 20 kN increments

Read More

BOTTLE ROLLER DI BANDUNG 081 394 133 446

                        

                          Bottle Roller

(item code : 0703)

KETERANGAN

Bottle Roller

Part Name Specification ;

Power Source Electric, 220 V, 100 Watt, 50 Hz, 1 Phase, 80 RPM.

Supplied complete with 1 kg capacity glass jar.

Dimension ( l x w x h) : 60 x 30 x 90 cm .

Read More